Clay Mender, Bisque Fix for Pottery High Temperature Resistance Strong Adhesion Cone 04 Firing Smooth Delicate Texture for Repair Cracks Bond Damaged Green and Bisque, 120ml

Cracks, dents, and minor seams are normal occurrences in ceramic products. However, losing a ceramic piece you spent hours shaping, repairing, and sculpting is not always a good thing.This ready-to-use bisque fix for pottery is not glue or epoxy resin, but a clay-based repair paste. Its formula allows it to fuse seamlessly with your original work after drying, resulting in a natural finish after firing.How to use:1. Wetting – Wet the crack or damaged edges with a brush or sponge.2. Application – Apply the lubricant directly to the damp surface with a brush or cloth.3. Drying and firing – After completely drying, bisque-fire at a 04 taper. The repair effect will be permanent.Precautions:1. Adjustable consistency – Can be used directly to repair minor cracks. Adding dry clay powder increases the consistency for repairing larger holes or missing parts.2. Suitable for bisques – Suitable for already fired (bisque) surfaces.3. Firing Requirements: This product is for kiln repair. It must be fired to taper 04 (approximately 1063°C/1945°F) to achieve permanent adhesion. Do not use on finished and glazed pottery unless a second firing is planned.4. Wet the surface before applying the slurry. Dry clay absorbs moisture too quickly, resulting in poor adhesion.5. Do not apply a single layer more than 6 mm (¼ inch) thick. For deeper repairs, apply multiple layers, allowing each layer to partially dry after application.6. Seal the container tightly when not in use.7. Always test on a small area before performing a full restoration on a valuable object.

• Clay Repair Agent: This bisque fix for pottery is formulated specifically for repairing minor cracks, scratches, and surface dents on bisque-fired ceramics. It forms a strong, seamless adhesive layer that blends perfectly with the natural properties of clay, allowing it to dry and fire naturally without peeling after curing.
• Fine Repair: The smooth, fine texture allows for precise repair of minor cracks. It can be used to repair minor cracks, scratches, and surface dents before bisque firing. It adheres firmly upon application and does not shrink excessively after drying.
• High Temperature Resistance: It fuses seamlessly with the body at a standard taper of 0.4 (approximately 1063°C). After firing, the repaired area is almost completely invisible, with a uniform glaze and preserved structural integrity. Satisfactory results are also achieved at tapers of 0.6 to 0.3.
• Application Method: Simply wet the crack or damaged area with water, apply the clay mender paste to smaller cracks, and allow it to dry naturally. The repair will fuse naturally during firing. For larger cracks, it can be mixed with dry clay powder to create a thicker clay paste.
• Wide range of uses: Whether you are a ceramic artist, hobbyist, or teacher, this repair liquid can save your precious bisque-fired works and prevent them from being discarded.